Our Products -> Fiberdur ISO CSEP 16/10

Fiberdur ISO CSEP 16/10

Fiberdur® filament-wound pipes “Fiberdur ISO CS-EP 16/10” are manufactured from epoxy resin with a special chemical protection layer. They are available in the standard product range with nominal diameters of 25 - 300 mm for pressures 16 and 10 bar (nominal pressure). As of DN 350 the dimensions correspond to our Fiberdur CSEP 16 10 System. CSEP pipes are hotcured in a curing station at a temperature of more than 90°C. This curing results in a thorough impregnation of the elementary fibres. 

Our pipes are supplied with integral bell and spigot ends. This design allows fast installation in the case of long and mainly straight runs both for buried and overground applications. All pipes are available in Navicon (electrically conductive) or with lock seal joint.


(1) Resin-rich interior coating,
highly corrosion-proof 2,5 mm

(2) Laminate rovings embedded in resin

(3) Topcoat 0,3 mm


Wall thickness and number of layers of the reinforcing material according to the requirements. The winding angle is 54°. Glass content in the structural layer 70 ± 5% (weight), in the chemical protection- and abrasion layer 25 ± 5% (weight).

↑ top
Jobs · News · Contact us